Measurement and numerical simulation of three‐dimensional fiber orientation states in injection‐molded short‐fiber‐reinforced plastics

To determine three‐dimensional fiber orientation states in injection‐molded short‐fiber composites, a confocal laser scanning microscope (CLSM) is used. Since the CLSM optically sections the specimen, more than two images of the cross sections on and below the surface of the composite can be obtained. Three‐dimensional fiber orientation states can be determined by using geometric parameters of fiber images obtained from two parallel cross sections. For experiments, carbon‐fiber‐reinforced polystyrene is examined by the CLSM and geometric parameters of fibers on each cross‐sectional plane are measured by an image analysis. In order to describe fiber orientation states compactly, orientation tensors are determined at different positions of the prepared specimen. Three‐dimensional orientation states are obtained without any difficulty by determining the out‐of‐plane angles utilizing fiber images on two parallel planes acquired by the CLSM. Orientation states are different at different positions and show the shell–core structure along the thickness of the specimen. Fiber orientation tensors are predicted by a numerical analysis and the numerically predicted orientation states show good agreement with measured ones. However, some differences are found at the end of cavity. They may result from the fountain flow effects, which are not considered in the numerical analysis. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 500–509, 2003     

Evaluation of performance enhancing proxies in internet over satellite

Performance enhancing proxies (PEPs) are widely used to improve the performance of TCP over high delay‐bandwidth product links and links with high error probability. In this paper we analyse the performance of using TCP connection splitting in combination with web caching via traces obtained from a commercial satellite system. We examine the resulting performance gain under different scenarios, including the effect of caching, congestion, random loss and file sizes. We show, via analysing our measurements, that the performance gain from using splitting is highly sensitive to random losses and the number of simultaneous connections, and that such sensitivity is alleviated by caching. On the other hand, the use of a splitting proxy enhances the value of web caching in that cache hits result in much more significant performance improvement over cache misses when TCP splitting is used. We also compare the performance of using different versions of HTTP in such a system. Copyright © 2003 John Wiley & Sons, Ltd.     

V波段小型化低相噪频率综合器

本文研究了一种V波段超小型低相噪频率综合器,研制了L段捷变频频综、Ku波段取样锁相源、上变频组件、倍频器等四个小型化组件.为了得到较低的相位噪声和捷变频速度,本捷变频频综采用上变频-倍频方案,其中DRO PLS保证低相位噪声性能,L波段捷变频频综保证捷变频功能.该频综尺寸为100×80×30mm³,相位噪声低于-86dBc/Hz(1kHz),捷变频时间小于40μs,杂波抑制优于-60dBc.     

小卫星及多星测控的技术发展

本文从小卫星、星座飞速发展以及对测控通信系统新的要求出发，介绍了综合基带、连续波多波束相控阵天线的功能、特点及工作原理，提出了建立新型多功能智能化测控通信站的设想。     

INMARSAT 21世纪工程——全球个人移动卫星通信

本文概述INMARSAT 21世纪工程的规划及为实现这一规划,INMARSAT组织在本世纪末正在进行和即将进行的一系列卫星通信技术工作。着重阐述INMARSAT 21世纪工程的业务性能以及对三种卫星布局方案进行抉择的新动向。     

宽带自适应跳频控制器

本文叙述宽带自适应跳频控制器的原理及方案,频率集的配置、自适应跳频拒收门限及频点更新、跳频码序列及同步等。有效地组织宽带自适应跳频系统能避开大部分固定和半固定性质的单频连续波干扰,使得移动卫星通信系统中实现高可靠性的数据传输。     

卫星通信技术的新进展

本文对国内外卫星通信的最新发展作了详尽论述;并综合概括了未来卫星通信技术的发展趋势;最后,对卫星通信市场进行了预测。     

低轨小型卫星的发展和应用

本文介绍低轨小卫星的发展和应用前景。低轨小卫星,体积和重量小,轨道低,功能单一,智能化,制造和发射都很容易,投资费用低,受到用户的普遍欢迎,有广阔的发展和应用前景。 小卫星在近几年发展迅速,应用广泛,已经受到世界各国的重视。在许多方面,已经应用小卫星和计划中应用小卫星的例子很多,本文只作简要介绍,目的在于引起人们的重视,发展我国的小卫星事业。     

日本国内卫星通信应用及“超鸟”通信卫星技术概况

日本卫星通信事业发展迅速,国内各大部门积极利用通信卫星,建立支援地面通信系统的线路。文章介绍日本九个部门利用卫星通信的概况,这些部门大都有自己的固定地球站和车载地球站,实践证明在突发事件中发挥了很大作用。 日本“超鸟”通信卫星是私营通信卫星,用于日本国内卫星通信,其中x波段供防卫厅用于移动通信,卫星发射重量为2.5吨,寿命10年,三轴稳定,星上装有19套Ku波段转发器,10套Ka波段转发器和两套x波段转发器,“超鸟”卫星也是世界上最大级的通信卫星,运用了最先进的技术,本文主要介绍日本国内卫星通信及“超鸟”通信卫星技术概况。     

用强度系列成象法获取或显示高动态范围图象

提出一种适合于高动态范围图象的获取和显示的强度系列成象法。改变输入图象的强度，微机控制的图象采集系统进行记录得到一组磁盘文件，形成强度图象系列。基于记录的系列图象，可以进行信息提取、变换和显示等操作。基于获得的图象系列，提出一种剪贴操作进行快速的非线性图象变换。给出对光学功率谱处理的一个实例，它相当于进行锯齿形的非线性变换。